Cannanore Handlooms
Measurement Guide
Effective Date: 11 August 2026
Choosing the right size is important for getting the best fit and appearance from your Cannanore Handlooms products. This guide explains how to measure fabrics, table linen, clothing, towels, and home textile products accurately before placing an order.
All measurements on our website are provided in centimeters (cm) unless otherwise stated.
How to Measure Correctly
For the most accurate measurement:
- Use a flexible measuring tape.
- Measure on a flat surface whenever possible.
- Do not pull the tape too tight.
- Keep the tape level and straight.
- For garments, wear light clothing while measuring.
- Measure twice before ordering.
Unit Conversion
- 1 cm = 0.39 in
- 10 cm = 3.94 in
- 50 cm = 19.69 in
- 100 cm = 39.37 in
1. Fabric Measurement Guide
Our fabrics are sold by meter length.
Width
Measure from one selvedge edge to the other.
Length
Measure the required running length.
Example: Width: 150 cm Length ordered: 3 meters (300 cm)
You will receive one continuous piece measuring approximately 150 cm × 300 cm unless otherwise specified.
Fabric Planning Tips
- Cushion covers: add seam allowance.
- Curtains: add fullness allowance.
- Table linen: add overhang allowance.
- Garments: follow your pattern requirement.
2. Tablecloth Measurement Guide
Measure the tabletop first, then add the desired drop on each side.
Formula
Tablecloth Length = Table Length + (Drop × 2)
Tablecloth Width = Table Width + (Drop × 2)
Recommended Drop
- Casual: 15–20 cm
- Standard dining: 20–30 cm
- Formal dining: 30–40 cm
Example
Table size: 150 cm × 90 cm Desired drop: 25 cm
- Length: 150 + 50 = 200 cm
- Width: 90 + 50 = 140 cm
Recommended tablecloth: 200 cm × 140 cm
3. Table Runner Measurement Guide
A table runner should extend beyond the table edges for a balanced look.
Recommended Length
Table length + 20–40 cm total extension.
Recommended Width
Usually 30–45 cm, depending on table size.
Example
Table length: 180 cm
Recommended runner length: 200–220 cm
4. Napkin Measurement Guide
Common napkin sizes:
- Cocktail: 20 × 20 cm
- Tea / Snack: 30 × 30 cm
- Standard dining: 40 × 40 cm
- Formal dining: 45 × 45 cm or larger
5. Apron Measurement Guide
Measure around the body and vertically from chest to knee.
Measurements Needed
- Chest circumference
- Waist circumference
- Hip circumference
- Apron length (from upper chest to desired hem)
Our aprons generally include adjustable neck and waist straps to accommodate a range of sizes.
6. Towel Measurement Guide
Lay the towel flat and measure edge to edge.
- Face towel: approx. 30 × 30 cm
- Hand towel: approx. 40 × 60 cm
- Bath towel: approx. 70 × 140 cm
- Bath sheet: approx. 90 × 160 cm
Actual product dimensions may vary slightly.
7. Garment Measurement Guide
Measure the body, not a loose tape over bulky clothing.
Bust / Chest
Measure around the fullest part of the bust or chest.
Waist
Measure around the natural waistline.
Hip
Measure around the fullest part of the hips.
Shoulder
Measure from shoulder point to shoulder point across the back.
Sleeve Length
Measure from shoulder point to wrist.
Garment Length
Measure from the highest shoulder point to the desired hem.
Women's Garment Reference
All values in centimeters (bust · waist · hip):
- S: 84–89 · 66–71 · 91–96
- M: 90–95 · 72–77 · 97–102
- L: 96–101 · 78–83 · 103–108
- XL: 102–107 · 84–89 · 109–114
- XXL: 108–113 · 90–95 · 115–120
Men's Garment Reference
All values in centimeters (chest · waist):
- S: 91–96 · 76–81
- M: 97–102 · 82–87
- L: 103–108 · 88–93
- XL: 109–114 · 94–99
- XXL: 115–120 · 100–105
8. Lungi and Dhoti Measurement Guide
Standard Cannanore Handlooms Lungi Size
- Length: approximately 190 cm
- Width: approximately 128 cm
Measure from one end to the other while the fabric is laid flat.
9. Cushion Cover Measurement Guide
Measure the cushion insert from seam to seam.
Recommended Cover Size
- Use the same size for a standard fit.
- Use a cover 2–5 cm smaller for a fuller appearance.
Example: Insert: 45 × 45 cm → Cover: 45 × 45 cm (standard) or 43 × 43 cm (fuller fit).
10. Curtain Fabric Estimation
Width Requirement
Window width × 1.5 to 2.5 for fullness.
Length Requirement
Measure from curtain rod to desired hem.
Add:
- 10–15 cm for top finishing
- 10–15 cm for bottom hem
11. Measurement Tolerance
Handcrafted textile products may vary slightly.
Unless otherwise stated, a tolerance of approximately ±2–5 cm may occur depending on the product type and finishing process.
12. Tips Before Ordering
- Compare your measurements with the product size chart.
- When between sizes, choose the larger size for a more comfortable fit.
- For table linen, always include the desired drop.
- For garments, check whether the product is described as slim fit, regular fit, or relaxed fit.
- Contact us if you need a custom size.
13. Need Help Choosing a Size?
If you are unsure about measurements, please contact us before placing your order.
Cannanore Handlooms Website: www.cannanorehandlooms.com Contact: contact form Phone: +91-7591919910
Please include the product name or link and your measurements, and our team will be happy to assist you.
Thank you for choosing Cannanore Handlooms. Accurate measurements help ensure the best fit, appearance, and satisfaction with your handcrafted textile purchase.
